Product
Description

Part Number: BB10A

Price: $49
(Qty 1)

Data Sheet

User Guide

Mechanical

The Battery Boss BB10A is a low cost multi-function module designed to simplify the construction of battery powered embedded processor systems. The integration of battery charger, power switch, DC converter and internal software greatly simplifies target system design. Various operating modes and features can be configured through programming of internal EEPROM memory.

Flyback regulated outputs provide +5, +3.3 and +/-14 volts with total output power limited to 10 watts. A user trim pot is available to trim overall output voltages. To reduce weight and cost input common mode filters have been eliminated.

A schematic diagram is provided to assist with the integration of the BB10A into user applications. The circuit module is available without the mounting plate which allows the user to easily mount the BB10A using the user chassis as a heat sink. Final assembly with the user system is simplified using double sided adhesive.

Part Number: BB25

Price: $99
(Qty 1)

Data Sheet

User Guide

Mechanical

The Battery Boss BB25 is a low cost multi-function module designed to simplify the construction of battery powered embedded systems. The integration of battery charger, power switch, and DC converter greatly simplifies embedded system design. Features such as a Real Time Clock, Programmable Wake Up Timer and Watch Dog Timer are included. A RS-232 serial port provides monitoring and control of various functions. Analog and digital signals can be allocated for user applications.

Flyback regulated outputs provide +5, +3.3 outputs with linear regulators providing +/-12 volts at 100ma.. Total output power is limited to 17 watts. A user trim pot is available to trim overall output voltages. Common mode chokes are provided on both power inputs and outputs.

The BB25 also serves as a development platform for BB10A applications.

Part Number: BBURC

Price: Call

Data Sheet

Schematic

User Guide

Mechanical

The Battery Boss BB-URC is a multi-function power controller / UPS with built in battery charger, output regulators and electronic circuit breakers. This design provides up to 35 watt of regulated DC output. Each 17 watt output is rated from 1.5 to 5 volts at 3.5 amps. Standard configuration provides +5 and +3.3V outputs. Each cannel can operate as an independent output or the two channels can be connected in parallel. Battery voltage is passed though current limit hardware with a software controlled circuit breaker.

High current charging is implemented using a simple series resistor while internal logic provides PWM charging control. A complete Real Time Clock is provided with an on board Li cell. All the features of the BB25 are provided.

The BB-URC is idea for 12 volt vehicle system using 7 or 8 cell NiCd or NiH battery backs. 12V lead acid batteries are supported when using 18 or 20V DC inputs.

BBUC75

Price: Call

Data Sheet

User Guide

Mechanical

The Battery Boss BB-UC75 is a multi-function power controller / UPS with built in battery charger, output regulators and electronic circuits breakers with remote control operations and monitoring. A 75 watt input converter accepts a wide range of input voltage range and provides CC/CV battery charging. This architecture provides step up or step down of input voltage to the range required for charging or user circuits. On board regulators from up to 35 watts of power across 2 output channels. Channels can be operated independently or in parallel.

Up to 6 output voltages are provided. Internal DC converters provide 3.3V and 5.0 Volt outputs at 3.5amps each. Battery voltage is provided through an electronic circuit breaker for short circuit current limiting. Two optional "1/2 Brick" DC converter can be used to provide a total of 3 additional output voltages.

All the software features of the BB25 are provided. Optional heat sinks are required depending on power levels and system air flow.

BB-FS

Price: Call

Data Sheet

User Guide

The Battery Boss BB-FS is is a multi-function power controller / UPS with built in battery charger, output regulators and electronic circuits breakers with remote control operations and monitoring. The BB-FS contains a power analog switch which instantly connects the user load with either a DC input or battery. The advantage of this architecture is theinput power converter need only handle power associated with battery charger. This allows operation in closed environment and eliminates the need for heat sinks in many applications. With the input converter free from handling load current the battery can be charged at over 4 amps.

A single 5.0V 5 amp regulator is provided while the battery voltage output is passed through an electronic circuit breaker. The on board RS-232 port provides all the functions of the BB25.

BB25-Kit OEM & Development Support
Price: $175

A complete development kit including the BB25, 8 cell battery pack, prototype connector board and wall transformer simplifies the integration of Battery Boss technology into a user application. A standard BB25 providing +5, +3.3 and +/- 12 volt outputs is set to charge the supplied battery at 250ma. Actual battery types vary, call for specific battery availability.

A RS-232 interface allows customization of options and features for user applications. These constants can be used in either the BB25 or BB10A models.

Index Designs - Baltimore, Maryland - USA
1-410-821-1315 - sales@indexdesigns.com - http://www.indexdesigns.com